** This product comes without sensor, sold separately **

Available sensors:

-temperature sensors 2/5/10M(article code 11998, 11999, 12000)
-humidity and temperature sensors (article code 12001)


- The Clima Micro Plus Minimum Fan Speed can measure and display the current temperature value of connected sensors, and record and display the minimum/maximum values

- Controls the minimum fan speed to reach or maintain the desired temperature

- LED indicates stable climate or high temperature

- Minimum fan speed and temperature setpoint are saved in the event of a power failure

- Temperature setting range: 15 °C – 35 °C

- Hysteresis setting range: 1 °C – 5 °C

- Minimum fan speed setting range: 10% – 100%

- The display is updated every second

- Automatic switch off of the display backlight after 60 seconds

- Automatic detection of cable failure or poor connection with the sensor

- 2 UTP ports

- Available in the version: 5A

- Easy fuse replacement (spare fuse included)

- Minimum required sensor: TempProbe

- Various sensors are available separately

- Possibility to connect the TechGrow Datalogger (DL-1)
Controls: Intake fan & outtake fan
Display: Yes
Display characters: 2 x 8
Displays: Temp, fan speed, min & max, negative pressure
Sockets: 2

Software functions
Temp range: 15 °C – 35 °C
Minimum fan speed setting range: 10% - 100%
Negative pressure range: 0 - 50%

Power supply
Power supply: 100v - 240v
Internal use: 3 Watt
Fuse: 5 Amp
Triac: 2 x 12 Amp
Power cord: 3 x 1.5mm / 1.7m