** This product comes without sensor, sold separately **

Available sensors:

-temperature sensors 2/5/10M(article code 11998, 11999, 12000)
-humidity and temperature sensors (article code 12001)



With the Clima Micro Plus Min/Max Fan Speed you achieve or maintain the desired temperature level in your room in a very efficient way.

The Clima Micro Plus Min/Max Fan Speed is easy to operate with three rotary knobs to set the minimum and maximum fan speed, and the desired room temperature (between 15 °C and 35 °C). The controller even allows you to set a hysteresis (1 °C – 5 °C).

The clear display shows the current room temperature, as well as temperature setpoint, fan speed, minimum and maximum measured temperature, and hysteresis.

Features
- The Clima Micro Plus Min/Max Fan Speed can measure and display the current temperature value of connected sensors, and record and display the minimum/maximum values
- Controls the minimum and maximum fan speed to reach or maintain the desired temperature level
- Minimum fan speed, maximum fan speed and temperature setpoint are saved in the event of a power failure
- Temperature setting range: 15 °C – 35 °C
- Hysteresis setting range: 1 °C – 5 °C
- Minimum fan speed setting range: 10% – 100%
- Maximum fan speed setting range: 45% – 100%
- The display is updated every second
- Automatic switch off of the display backlight after 60 seconds
- Automatic detection of cable failure or poor connection with the sensor
- 2 UTP ports
- Available in the version: 5A
- Easy fuse replacement (spare fuse included)
- Minimum required sensor: TempProbe
- Various sensors are available separately
- Possibility to connect the TechGrow Datalogger (DL-1)