FD160
The FD series industrial dehumidifiers are suitable for humidity control in commercial and industrial spaces. Particularly robust and durable, they are easy to install and maintain.
They can also be used in environments where food products are stored or in industrial processes where humidity control is required.
They feature a washable dust filter and must be connected to a fixed exhaust. They are equipped with an on-board mechanical dehumidifier.
A remote digital dehumidifier can be connected.
The FD series fixed dehumidifiers are equipped as standard with an optional HOT GAS defrosting system with electronic and thermostatic control and can operate down to temperatures close to 0°C.

REFRIGERATION CIRCUITE
vaporator and condenser: the coils are made of copper tubes and aluminum fins. Dehydrator filter, Shrader valves, minimum and maximum pressure switches. Defrost thermostat and solenoid valves in the S version.

CONDENSATE COLLECTION TANKMODELS FD160
The tank is made of corrosion-resistant plastic. The dehumidifier must be connected to a fixed drain, avoiding the formation of double siphons, using a hose with a ¾" F connection to the tank.

CONDENSATE LIFT PUMP (optional)Available upon request.FANDouble-inlet centrifugal fan, constructed with sturdy galvanized sheet metal blades, statically and dynamically balanced.

PROTECTION RATINGStandard IP21. IP44 upon request.HOT GAS DEFROSTAllows the dehumidifier to be used in environments with temperatures down to 0.5°C. This special hot gas injection system speeds up the defrosting of ice that has formed in the evaporator.

AIR SUPPLY
The air supply intake is standard on the side opposite the intake, but the dehumidifier is available in the TOP version (with outlet on the top of the unit).

AIR FILTER
Made of polyurethane, the air filter is washable and easily replaceable. High-efficiency filter.

MICROPROCESSOR
Controls the defrost cycles, the compressor timer, and the alarm board.

CONTROL PANEL
Located on the side of the unit. Complies with European standards.

TESTING
Leakage tests on the refrigeration circuit, all electrical tests required by EC regulations, and a functional test are performed.

TECHNICAL REFERENCE STANDARDS
This dehumidifier meets the essential requirements of European Community Directives 2006/95/EC of 12 December 2006 on the safety of electrical products for use in low voltage; 2004/108/EC of 15 December 2004 on Electromagnetic Compatibility; 2006/42/EC of 17 May 2006 on Machinery Safety. Conformity is declared with reference to the following harmonized technical standards: CEI-EN 60335-2-40, CEI-EN 55014-1, CEI-EN 55014-2. It is also declared that the product is manufactured in compliance with the current RoHS Directive, namely 2002/95/EC, implemented by Legislative Decree no. 151 of 25 July 2005 (Article 5).Technical FeaturesNominal dehumidification capacity (32°C - 90% RH): 160 L/24hAverage nominal power consumption (26.7°C - 60% RH): 2.2 kWMaximum power consumption (35°C - 70% RH): 2.5 kWMaximum current consumption (35ºC - 70% RH) FLA: 11.5 AInrush current LRA: 39 ASound pressure level (3 meters in free field): 54 dB (A)Refrigerant: R410aCondensate drain connection on the machine: ¾" MOperating range (temperatures): 7÷35°COperating range (temperatures) - opt. hot gas defrost: 0.5÷35°COperating range (temperatures) - opt. operating temperature below freezing: -0.5°C to 35°COperating range (relative humidity) T < 30°C: 45-99%Operating range (relative humidity) T 30-32°C: 45-90%Operating range (relative humidity) T 32-35°C: 45-70%Average rated power consumption (20°C - 60% RH) with 4kW heating elements: 6.2 kWHot water coil heating capacity (ambient 27°C, water 70/60°C): 5 kWAvailable voltage: 230/1~/50Nominal air flow: 1500 m³/hAvailable static pressure: 100 PaWidth: 976 mmDepth: 682 mmHeight: 580 mmWeight: 66 kg