TechGrow Clima Micro Plus Temp/Negative Pressure Control

With the Clima Micro Plus Temp/Negative Pressure Control from TechGrow, you can easily create the right temperature in your room. This controller not only regulates the minimum fan speed of the main fan to reach or maintain the desired temperature, but also controls the air pressure (negative pressure) of the second fan for optimal air circulation.

The fan control operates based on the minimum fan speed, temperature and hysteresis, negative air pressure, and maximum fan speed (100%). The display shows the actual measured temperature and the recorded minimum/maximum values from the connected sensor.

This smart controller is easy to install and allows you to set a temperature hysteresis for fine-tuned control.

Key Features

• Measures and displays temperature, fan speed, min/max values, and negative pressure
• Controls minimum fan speed and negative pressure for optimal air circulation
• Saves minimum fan speed, temperature, and negative pressure settings in case of power failure
• Temperature range: 15 °C – 35 °C
• Temperature hysteresis range: 1 °C – 5 °C
• Negative pressure range: up to 50% of the main fan's speed
• Minimum fan speed range: 10% – 100%
• Display updates every second
• Automatic display backlight switch-off after 60 seconds
• Automatic detection of cable failure or poor sensor connection
• 2 UTP ports
• 2 sockets
• Available version: 2x 2.5A
• Easy fuse replacement (spare fuse included)
• Minimum required sensor: TempProbe (other sensors available separately)

Technical Data

• Power supply: 100V - 240V
• Internal power usage: 3 Watt
• Fuse: 5 Amp
• Triac: 2 x 12 Amp
• Power cord: 3 x 1.5mm / 1.7m
• Software version: v2.0 (latest update: 23-7-2019)

Box Contents

• Clima Micro Plus Temp/Negative Pressure Control
• Mounting kit
• Spare fuse
• User Manual