** This product comes without sensor, sold separately **

Available sensors:

-temperature sensors 2/5/10M(article code 11998, 11999, 12000)
-humidity and temperature sensors (article code 12001)


Reach the desired temperature and relative humidity in your room with the Clima Micro Plus Temp/Humidity Fan Control.

The Clima Micro Plus Temp/Humidity Fan Control is easy to operate with three rotary knobs to set the minimum fan speed, as well as the desired relative humidity and temperature level in your room. This controller also has the option to set a hysteresis for temperature and relative humidity.

The clear display alternately shows the current room temperature and relative humidity, associated setpoint and hysteresis, minimum and maximum measured values for temperature and relative humidity, current fan speed and the set minimum fan speed.

Features
- The Clima Micro Plus Temp/Humidity Fan Control can measure and display the current temperature and relative humidity values of connected sensors, and record and display the minimum/maximum values
- Controls the minimum fan speed to reach or maintain the desired temperature and relative humidity
- Minimum fan speed, temperature setpoint and relative humidity setpoint are saved in the event of a power failure
- Temperature setting range: 15 °C – 35 °C
- Hysteresis temperature: 1 °C – 5 °C
- Minimum fan speed setting range: 10% – 100%
- Relative humidity setting range: 40% – 90%
- Hysteresis relative humidity: 0% – 5%
- The display is updated every second
- Automatic switch off of the display backlight after 60 seconds
- Automatic detection of cable failure or poor connection with the sensor
- 2 UTP ports
- Available in the version: 5A
- Easy fuse replacement (spare fuse included)
- Minimum required sensor: Temp/RH Sensor
- Various sensors are available separately
- Possibility to connect the TechGrow Datalogger (DL-1)